Catalog - BoxForCam

Kits

KIT 1. Main BOXFORCAM unit

001

COLOR

Black

White

The bedrock element of your BOXFORCAM system. It is compatible with over 1000 camera models. Mounted easily to any surface BOXFORCAM is reliable, functional and aesthetic.

read more... BOXFORCAM can be installed on any surface. Using other components of the system such as brackets, extension poles, outriggers you can have your BOXFORCAM installed absolutely anywhere.

The main distinguishing feature of our junction box is the 10-ray design of camera slot that allows guided screw positioning for better precision. You only need to drill the central hole, put the wires in there and position the camera flange so that the mounting holes on the camera coincide with the slot in the box, and then secure the camera by tightening the screws.

Our box is made of a compound of two plastics, ABS and PC. It is designed to operate in the harshest environments being resistant to snow, wind, rain and sunlight. Each side can withstand up to 11lb. of static load. The gasket made of thermoplastic elastomer fits perfectly into the recess on inner side of the cover ensuring compliance with IP66 waterproof standard.

Attention! Do not use 3rd party screws. Our self-tapping screws are made of stainless steel and are perfect for attaching cameras to our box. In each kit you will find 10 DIN912 hex socket screws for attaching the cover to the box and two cameras.

KIT 1. Main BOXFORCAM unit

Black

KIT 2. BOXFORCAM with mounting post/outrigger segment

002

COLOR

Black

White

SUPPORT/OUTRIGGER SEGMENT LENGTH

0.25 0.5 1 1.5 2

KIT 2 consists of BOXFORCAM unit, one segment of mounting post (length from 25cm to 200cm), and a bracket (2 brackets with poles longer than 1 meter).

KIT 2. BOXFORCAM with mounting post/outrigger segment

White

0.25

KIT 3. BOXFORCAM with mounting pole segment

003

COLOR

Black

White

MOUNTING POST/OUTRIGGER SEGMENT LENGTH

0.25 0.5 1 1.5 2

KIT 3 consists of BOXFORCAM unit, one segment of mounting pole/overhanging segment (length from 25cm to 200cm) and two brackets. Used to install BOXFORCAM away from the corner, over the wall etc.

KIT 3. BOXFORCAM with mounting pole segment

Black

0.25

BFC components

MOUNTING POST/OUTRIGGER SEGMENT

004

COLOR

Black

White

MOUNTING POST/OUTRIGGER SEGMENT LENGTH

0.25 0.5 1 1.5 2

Equipped with two square flanges can be mounted to both BOXFORCAM unit and a wall.

read more... Outriggers can also be used to mount cameras at a distance from the plane or to overhang the support from the wall. It is a tube with two square flanges. The BoxForCam system is screwed directly to the support/outrigger flange. The outrigger can be mounted with self-tapping screws directly to the wooden or metal wall or using plugs/dowels to the concrete wall or gypsum plasterboard. Colors: black and white The segment length can be:

MOUNTING POST/OUTRIGGER SEGMENT

Black

0.25

MOUNTING POLE/OVERHANGING SEGMENT

005

COLOR

Black

White

MOUNTING POLE/OVERHANGING SEGMENT LENGTH

0.25 0.5 1 1.5 2

One end has a square flange when another is free.

read more... It can be shortened at any time as needed. The free end of the support bracket is closed by a special plug or a corrugated connector (it is designed to be an outlet for the cables of the support bracket directly into the support).

The support and the support bracket are attached to each other by means of one or two cramps. Don't forget to purchase this fastener in our store if you need it for mounting your specific BoxForCam system. Colors: black and white The segment length can be: 0.25m 0.5m 1m 1.5m 2m

MOUNTING POLE/OVERHANGING SEGMENT

White

0.25

BRACKET

006

COLOR

Black

White

Brackets are used to secure mounting poles to flat surface or to cross-connect two pipes.

read more... With the help of the cramp, it is possible to fix the box anywhere on the support. In this case, you will drill a hole for the outlet of cables of the required diameter in the tube. A small hole in the middle of the cramp can be used as a stencil for the alignment hole.

BRACKET

White

Other components

SELF-TAPPING 3.8mm SCREWS, 5 pcs.

007

Self-tapping screw length

10mm 20mm 40mm

Self-tapping Din 912 screws allow you to attach the cover and cameras to the BoxForCam box. With their help, the box is also mounted anywhere in the tube with a cramp. read more...

Number of screws in the set: 5 pcs.

Material: Stainless steel AISI 304 (Austenitic 2)

SELF-TAPPING 3.8mm SCREWS, 5 pcs.

M4 DIN912 SCREWS WITH NUTS, 5 pcs.

008

A kit of screws with nuts made of DIN 912 stainless steel is required to connect the support segments to each other. You will also need a kit of screws and nuts if two tubes are connected to each other by means of two cramps. read more...

M4 DIN912 SCREWS WITH NUTS, 5 pcs.

Plastic plug D50mm

010

The plastic plug is designed to plug the free end of a 50 mm pipe.

It is delivered in the kit with the support bracket, but can also be purchased separately. read more...

Plastic plug D50mm

PND-6 6X30 polyamide dowels, 5 pcs.

011

It is designed for light mounting to solid and hollow materials, such as natural stone, concrete, red and silicate brick, and hollow blocks. Due to the “whiskers”, it is perfectly fixed in the drilled hole. It is made of polyamide.

read more... The positive features of this material are as follows:

Flexibility. Under heavy loads and stretching, it is not susceptible to shape deformation.

It does not possess combustibility and does not flash during the fire. It just fuses and smolders.

It is not exposed to ultraviolet; it does not burn out and does not lose the original color under the influence of ultraviolet.

It is resistant to the formation of mold and fungus.

It can be used in aggressive conditions, as it is not susceptible to corrosion by salts, acids, and alkalis.

It is high-strength since it consists of threads, one of which can withstand a huge load of 1.5 kg.

PND-6 6X30 polyamide dowels, 5 pcs.

3mm HEX BITS KIT, 5 pcs.

012

Length: 25 mm. The bits have magnetic properties allowing them to hold the self-tapping screw in any convenient position. They are made of S2 alloy tool steel.

read more... They are designed to work with self-tapping screws with an internal hexagon which are complete in the kit and to work with DIN912 screws with an internal hexagon.

3mm HEX BITS KIT, 5 pcs.

4.2 mm metal drill

014

The drill is used to drill out holes on the metal surface for screws with a diameter of 4.2 mm. It is also used to mark a hole for further drilling out with a stepped or pointed drill.

4.2 mm metal drill

HSS 4-32 mm stepped metal drill

015

This drill can be used if you need to make a hole in the tube to place the cables into the box or to pass the cables from one tube to another. Hole diameter: 4 to 32 mm

HSS 4-32 mm stepped metal drill

RUBBER SEAL FOR CABLE OUTLET, 27mm

023

Plug hole for cable passage. Serves for tight cable entry through a hole with a diameter of 27 mm. It is used when drilling a hole in a metal pipe.

RUBBER SEAL FOR CABLE OUTLET, 27mm

Black

CHOOSE AN OPTION SUITABLE FOR YOU

Kits

KIT 1. Main BOXFORCAM unit

KIT 1. Main BOXFORCAM unit

KIT 2. BOXFORCAM with mounting post/outrigger segment

KIT 2. BOXFORCAM with mounting post/outrigger segment

KIT 3. BOXFORCAM with mounting pole segment

KIT 3. BOXFORCAM with mounting pole segment

BFC components

MOUNTING POST/OUTRIGGER SEGMENT

MOUNTING POST/OUTRIGGER SEGMENT

MOUNTING POLE/OVERHANGING SEGMENT

MOUNTING POLE/OVERHANGING SEGMENT

BRACKET

BRACKET

Other components

SELF-TAPPING 3.8mm SCREWS, 5 pcs.

SELF-TAPPING 3.8mm SCREWS, 5 pcs.

M4 DIN912 SCREWS WITH NUTS, 5 pcs.

M4 DIN912 SCREWS WITH NUTS, 5 pcs.

Plastic plug D50mm

Plastic plug D50mm

PND-6 6X30 polyamide dowels, 5 pcs.

PND-6 6X30 polyamide dowels, 5 pcs.

3mm HEX BITS KIT, 5 pcs.

3mm HEX BITS KIT, 5 pcs.

4.2 mm metal drill

4.2 mm metal drill

HSS 4-32 mm stepped metal drill

HSS 4-32 mm stepped metal drill

RUBBER SEAL FOR CABLE OUTLET, 27mm

RUBBER SEAL FOR CABLE OUTLET, 27mm

CONTACT US

WE ARE OPEN TO COOPERATION